Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Build Stuff: Custom Plug & Lure Building, Rod Building » Rod Building

Rod Building So, you've landed a nice fish on a plug you made, eh? Now, the next step, building your own RODS!

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-02-2009, 09:05 PM   #3
Jigman
Registered User
iTrader: (0)
 
Jigman's Avatar
 
Join Date: Oct 2002
Location: Kentucky
Posts: 1,442
Like Numbskull said, move from one end of the shrink wrap to the other rotating the blank as you go. Go slow and make sure one section is tight before you continue down the blank. You ll have to watch heating the blank too much or you could do some damage. Did it a couple of times over cork tape and a number of times over the blank. If you go the latter route, I put a layer of wall tape down first and then a little epoxy on the tape to hold the shrink wrap tight. The 50% shrink that is often advertized is a little optimistic. More like 40%.

Jigman
Jigman is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:35 AM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com