Is this the Place?

[Rockfish9]

Originally Posted by numbskull

First rate!!!! Those are on the to do list for me as well. I actually cut a large plastic superstrike in half to get a pattern (getting more and more like Eddy everyday). I know they are not as good a plug as the 2.5oz version, but I'm hoping I can solve that and come out with something larger and heavier. I noted the hook and weight placement are somewhat different between the two different sized plugs.

Spent yesterday drilling, drilling, and drilling. Managed to fckup a bunch of Musso (BM) wadd clones cutting the eye angles . The stock I start with is rarely true square (I rip rough lumber to width but don't bother jointing and thickness planing it) and the special brad point drill bits I use don't run true if started in a drive/tail center hole so I drill my plugs after cutting off the ends. Getting eye holes perpendicular to the hook hole (without building a jig for each style plug) is something I still struggle with.

Got darter slopes to fckup today. The firewood pile ought to grow fast. I need one of those rubber mallets that's in Mr K's second picture. The wooden one is starting to leave a mark on my forehead,

Talk to Paul before you cut those slopes.....there is a better way.....

[numbskull]

Originally Posted by Rockfish9

Talk to Paul before you cut those slopes.....there is a better way.....

Nah, I do it on the bandsaw about the same as you, only I use the same pinned cradle I use to mark the layout lines. It is the belt sander where I screw 'em up. That is the step I'd love to eliminate. I hate belt sanders, probably I should get a rotary one I can sight down from above with.

[Slipknot]

George, are you holding your belt sander on edge?
It's easy to make a cradle for it to turn it into an edge sander.so you can eyeball whar you are sanding easier.
you could also setup a specific jig for sanding the slope so they come out all the same. I'd be glad to help you with that someday if you want.

[numbskull]

Mine is an old, old, old Sears thing with 8" by 36" (or something like that) platen and worn bronze bearings. The price was right, free. Been paying for it ever since.

[WoodyCT]

If it's free, it's for me!

Time to invest in a belt/disc combo Numbskull. Short money, and very handy.

[eastendlu]

Originally Posted by numbskull

Mine is an old, old, old Sears thing with 8" by 36" (or something like that) platen and worn bronze bearings. The price was right, free. Been paying for it ever since.

George i have literally tons of all kinds of bronze and other types of bushing making materials.If you need some made let me know i would be glad to manufacture them for you.

[JFigliuolo]

Originally Posted by numbskull

Nah, I do it on the bandsaw about the same as you, only I use the same pinned cradle I use to mark the layout lines. It is the belt sander where I screw 'em up. That is the step I'd love to eliminate. I hate belt sanders, probably I should get a rotary one I can sight down from above with.

I used to use the bandsaw/belt sander. There is a MUCH better way. Jigs and the table saw. Jigs make up VERY quickly and make cutting the slopes EXTREMELY easy and VERY consistant. All I use the BS for is easing the angle between slopes.