1. I use Round nose pliers and I'm a Cheap Bastard if that helps.
2. 5/32 here also for a drill bit
3 I epoxy the plug 1st, put a peice of playing card in the slot so the epoxy doesn't get in there (remember to pull it out before it set) then the lipsget epoxied in place just before I through wire.
If its a plug with no lip then I through wire 1st then epoxy it so it helps to keep the wire on place
"If you're arguing with an idiot, make sure he isn't doing the same thing."
You don't want to bother with all that.
Just cut a lip slot, drill an eye hole, then insert your hook in the slot and out the eye and you'll be good to go.
Mike at M&D's has good pliers and often also has drill bits.
You don't want to bother with all that.
Just cut a lip slot, drill an eye hole, then insert your hook in the slot and out the eye and you'll be good to go.
Mike at M&D's has good pliers and often also has drill bits.
You have been hangin around with Saurkraut too long.
Originally Posted by Flaptail
"Throw plugs like we do that will cause them to suffer humility. Pogies make any fisherman look good when bass are around. Bait is easy."
Hybrid Mode
