|
since you asked...
first off, you said "132 3m". no such animal from lami. you probably meant the sb1363m e-glass or ssb1363m s-glass models from lami. their gsb1321m or 1L are in the "132"/11' range if you got confused.
for what it is worth, glass has a limited use today in the surf in my opinion. if you need to custom build a rod for a certain application, such as a large, heavy pluggin' rod, then maybe glass, but glass overall is heavy. after fishing for graphite for so many years, it's hard to go back and their are plenty of options for fit a multitude of purposes. with that said, it's really hard to beat the lami gsb1201m (10') or gsb1321m (11') graphite blanks in general and for eeling rods. they are relatively inexpensive, proven, and pretty durable. both are good up to 4 ounces and 5 if you need to lob a little extra. every customer i've built either of these rods for has been more than happy with their choice. of course, my favorite all around jetty blank is still the glass sb1213m at 10'. glass does rule on a jetty, but under 10'
if you want something a little closer to glass, you could look at the L versions of either blank, but both start to really top off at 3 ounces. another option gaining popularity is the super seeker baby ulua. it's 10', composite s-glass/graphite and bends all the way to the butt w/ a lot of power in the butt. it loads real soft. it's a very popular pencil popper rod. but, this blank can push in price up to that is a lami super surf.
personally, i think the sb1083m is almost useless in the surf, except for throwing small rebel like plugs. i usually make the boat version of this blank into a boat spin rod and cut a lot off the tip. the lami graphite 9' blanks are much better options.
|
Threaded Mode