|
 |
|
|
|
 |
|
 |
|
StriperTalk! All things Striper |
 |
06-19-2010, 03:48 PM
|
#1
|
Afterhours Custom Plugs
Join Date: Mar 2004
Location: R.I.
Posts: 8,642
|
chris,
never weighed it
single roller, came with two i like one
broke off with two rollers- twice
no serious issues
got newer spool- sand no prob
drag can be adjusted while fighting fish
casts further than my vs's
oh yeah- drag is pissa......
|
|
|
|
06-19-2010, 04:18 PM
|
#2
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Got a first gen 25, dual roller.
I did weigh it and forget what it weighed, but loaded with line I think it was around 20-21 oz. About 2-3 oz more than they claimed and more than I felt was attributable to the line.
It has been great and I am very glad I bought it (and I hated spinning tackle). Mine gets drenched and I don't ever bother to even rinse it with freshwater.
The line rollers on mine grooved but didn't harm the line. They sent me new ones and said it was not a common problem (but I think Sandman had the same issue about the same time).
Once I got a grain of sand in the drag and it cleared easily. By habit I check my drag every few casts anyways.
Never had a line wrap casting.....but I use 30lb fireline which may be less likely to fluff. I like the dual roller.
You don't want opinions, but I would suggest the 25 for bass. The smaller spool may help you set up your rod with a smaller collector, it probably reduces the chance of a roller wrap, and the slower retrieve is better for night-time plugging.
|
|
|
|
06-19-2010, 04:47 PM
|
#3
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
the 25 is plenty big enough ,,unless you own a braid factory .. You can always get a 27 spool later. 25 and 27 the same rotor . I opted for the single roller . Why have 2? .. Just double your chances of hanging back up on the roller during casting . I lay it down in the sand ,, just dunk to rinse . I havn't serviced mine nor do I need too . I've checked inside and no water has been in there . I'm just going to use it until it's junk .. Then service it .
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
06-19-2010, 07:04 PM
|
#4
|
Registered User
Join Date: Dec 2004
Location: To close to water for my insanity
Posts: 884
|
I have a ? my self since i too have been looking into one.
I here that the older models made are 100 times better then the ones being built today. I friend of mine bought one last year but they didn't have them in stock so they sent him one to fish for the mean time(which I thought was awsome) only thing is that on the first 30" fish he hooked the handle broke.....So im up in the air...Seems to make sense since everyone that tells me they love it has had it for a while. Its a nice reel...thanks
|
offthehookfishing.com
|
|
|
06-19-2010, 09:00 PM
|
#5
|
Registered User
Join Date: Sep 2005
Location: Wareham, Ma
Posts: 171
|
My experience with mine was bad. Customer service was great but the reel always had a problem. I started with a second gen black 27 that leaked from the get go. Send it in ans said it was the oring returned back to me promptly. Leaked again a couple days later. Sent back, they said the side cover was not machined properly. Returned back to me, a week later I blew a clutch, sent back to them, fixed it. Got it back again and again blew a clutch, sent it in. This time I asked for a new reel and told them I did not even want to see another black zb again. They sent me a new silver one. Another clutch and something else. So I said goodbye ZB and hello VS.
On the other hand I did like the drag on it and have heard others have not had problems. Go figure. Maybe it is just me.
I have blown up an emblem, New Saltist, and a ZB in the last 2 seasons. The Dog Fight has been my workhorse.
|
|
|
|
06-20-2010, 01:24 AM
|
#6
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Rudy ... You break that Dog fight yet ? 
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
06-20-2010, 09:30 AM
|
#7
|
All up in the Interweb!
Join Date: Mar 2002
Location: In the dog house.
Posts: 5,205
|
I posted some specs here - http://www.striped-bass.com/Stripert...nt-models.html
I have since sold the ZB and gone back to all VS's. I never had the line catch the roller and do not fish sand so the issue people have had there did not come up. I did not like the drag and that was a big factor in getting rid of the reel. It has a progresisve drag which takes some getting used to. I kept finding myself adjusting the drag throughout a fisght as it never stayed where I wanted it to. On my 2nd trip out with the reel, it seized up solid. The reel was fixed and back in action within about 5 days with a brand new clutch, but I was still not happy to know they shipped the 1st generation ZB27's with a known faulty part.
|
Co-Host of The Surfcast Podcast
"Out there in the surf is where it's at, that's where the line gets drawn in the sand between those who talk fishing and those who live it."
- a wise man.
One good fish, a sharpie does not make...
Certified rock hopping billy goat.
|
|
|
06-20-2010, 09:46 AM
|
#8
|
Registered User
Join Date: Sep 2005
Location: Wareham, Ma
Posts: 171
|
Quote:
Originally Posted by Tagger
Rudy ... You break that Dog fight yet ? 
|
Nope, that bad boy is going strong!
|
|
|
|
 |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 01:09 PM.
|
| |