Sounder not workin at speed?

[MrHunters]

Originally Posted by PRBuzz

Here's another possibility: has the transducer pivoted on the mount such that it is no longer in a "horizontal" position? My Garmin transducer has a toothed ring which the transducer loosely locks into and some times if you take a wave hard the transducer will move a tooth or 2 in the mount so that it no longer points down. You do not want to over tighten as this is a way to prevent breaking the mount on hard hits.

that was my thought but would be obvious if your looking at it. Tell tale would be if your fish arches are only half arches.