Quote:
Originally Posted by Zeal
|
If you're going with the Sorbys, I'd get just three tools - 3/4" roughing gouge, 1/4" parting tool, and 3/4" skew. I recommend the 1/4" parting tool because if you went any narrower you might have trouble fitting your measuring calipers into the groove.
The 5-piece mini set is handy to have and a very good value, but certainly not essential. I only use the toxic dust respirator because I spend very little time around paint fumes. I only do a couple plugs at a time. I spray them quickly with rattle cans, then leave the room.
Hybrid Mode
