| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
02-15-2011, 01:33 PM
|
#1
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
thanks. I will figure something out tonite at work. the bottom line is I need a larger dia. hole in what ever I am going to use for a grommet. Last nite I tried using the nose grommet and decide that wasn't going to work so now with your method and some tinkering I will modify, make something. Thanks again for your time, PM's, Joe.
Hopefully I can show you something finished this weekend but there is also a good chance I will ruin it too.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
02-15-2011, 02:30 PM
|
#2
|
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
M&D's sells a larger nose grommet that works fine and allows you to make a tight joint. I forget the diameter but have some at home. It also helps to anneal the loop after you crush it.
|
|
|
|
|
|
|
02-15-2011, 02:52 PM
|
#3
|
|
Registered User
Join Date: Sep 2005
Location: Cumberland, RI
Posts: 2,264
|
Quote:
Originally Posted by numbskull
... It also helps to anneal the loop after you crush it.
|
I noticed that too... If I don't anneal it, I wind up pulling the tag end of the wire out a bit which loosens the joint. |
Good judgement comes from experience, and experience comes from bad judgement -- Keith Benning
|
|
|
|
02-15-2011, 03:05 PM
|
#4
|
|
Registered User
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,749
|
you guy's are heating the wire.... as long as you pre form the loop you will not need to heat the wire to anneal it...you should be using annealed wire to begin with, 1/8th hard is too brittle for this process..
|
A good run is better than a bad stand!
|
|
|
|
|
02-15-2011, 03:08 PM
|
#5
|
|
Registered User
Join Date: Sep 2005
Location: Cumberland, RI
Posts: 2,264
|
Quote:
Originally Posted by Rockfish9
..you should be using annealed wire to begin with, 1/8th hard is too brittle for this process..
|
I must have missed this part. And you are correct, now that I really think about it, I do use 308L and if I don't heat it, it snaps. |
Good judgement comes from experience, and experience comes from bad judgement -- Keith Benning
|
|
|
|
|
02-15-2011, 03:14 PM
|
#6
|
|
Registered User
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,749
|
Quote:
Originally Posted by JFigliuolo
I must have missed this part. And you are correct, now that I really think about it, I do use 308L and if I don't heat it, it snaps.
|
maybe not... it might be just like me to leave out that little ( but important) detail... |
A good run is better than a bad stand!
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:44 AM.
|
| |
Hybrid Mode