powder paint/toaster oven question.

[jlnel]

sorry if in wrong spot, i know this is plug building but thought this was close..

my question is - for those that use a toaster oven to cure thier powder coated jigs, what brand / model works well.

i have been looking on craigslist but most dont have a pic and i dont know the dimensions, i would need a tall one for 6-8oz jigs ..

thanks for the tips.

[JohnR]

Good location for it. I've though of doing it myself after watching a presentation by a local jigmeister.

Check out Wallymart and the like for cheap ones? I have seen some bigger ones but maybe also take some kind of rack on legs that will fit in a bigger toaster oven to suspend the jigs better..

[Redsoxticket]

Turn the smaller type oven on the left or right side along with appropriate racks
Posted from my iPhone/Mobile device

[jlnel]

ahhh, never thought of that, no safety shutoff like a space heater?

Originally Posted by Redsoxticket

Turn the smaller type oven on the left or right side along with appropriate racks
Posted from my iPhone/Mobile device

[Redsoxticket]

Don't leave unattended as you would food and pull the plug method is your manual safety override. The ovens have a temp control to prevent temps going over the preset value
Posted from my iPhone/Mobile device

[JohnR]

Originally Posted by Redsoxticket

Turn the smaller type oven on the left or right side along with appropriate racks
Posted from my iPhone/Mobile device

Nice idea