Nail Guns ...

[mikecc]

Ed I have a Bostich Stick Framer and a coil roofer you can borrow any time you need them.

[Tagger]

thank you guys ,, looking to buy so I have it ,, don't want to buy a roofing gun , so I'll be knocking on your door Mike .. thanks ,,.

[leptar]

Give the Numax 21-degree framer a look over before you decide..

I've owned the PC and Hitachi framers and without hesitation i bought the numax after using one at a friends house helping him build a shed and deck.

For what i paid for the numax i could have bough another and several boxes of nails before i came close to the price of a PC..

[Tagger]

Originally Posted by leptar

Give the Numax 21-degree framer a look over before you decide..

I've owned the PC and Hitachi framers and without hesitation i bought the numax after using one at a friends house helping him build a shed and deck.

For what i paid for the numax i could have bough another and several boxes of nails before i came close to the price of a PC..

are nails readily available for the Numax 21 ,, I just noticed HD carried the most nails for the PC .. Is that gun at HD ?? I'll check it out .

[leptar]

Originally Posted by Tagger

are nails readily available for the Numax 21 ,, I just noticed HD carried the most nails for the PC .. Is that gun at HD ?? I'll check it out .

Yes plastic collated 21-degree.. I bought a box of 10d galvi for a small job.. box had half the pieces broken.. i just lined them up.. had 1 piece that was broken cause a jam in the feed, because i used damaged nail strips...

yes at HD but online only...

This is a tool you can finish your job and put it away without thinking you spent too much...

When i sold my Hitachi i wanted to cry.. I didn't even get close to 1/2 of what i paid for it.. but i had changed careers and didn't need it anymore...

If your coming down towards Tiverton i can let you check it out, even plug in the compressor too....

[Slipknot]

For framing, Hitachi is the best

finish= Senco or Hitachi and they both shoot the same nail. I think if you won't use it all the time, then the Porter cable will do you fine and they might shoot the same nails too. Get the angled, not straight. Hitachi has a nice feature, an air blower button to blow the dust away.

compressor, it depends on how lightweight you want it. I use an Emglow 2 tube 1-1/2 hp and also have a lightweight oil less off the wall brand disposble but lasted 10 years so far, so I don't have to carry a heavy compressor like the Emglow