|
check and clean electrical connections...make sure they are solidly connected. Your service manual for that engine probably has a some sort of impeadence test or other kind of test you can run on that amp. Your battery is good right? Do you have two engines?..if so you can swap and check it that way. Dollars to donuts it is a bad connection..just don't look at/wiggle the connection, take them off, sand them down and re-tighten. (both the ground and the positive lead)
The good news is it does not sound like a costly problem.. A good mechanic could diagnose this in minutes and get you up...it might pay to just to have one look at it.
|
Threaded Mode