Thru Hull fitting

[ProfessorM]

thanks guys. All cleaned and sanded and will get some 5200 tomorrow.

[Raider Ronnie]

Paul
Your 1st post you say the old thru hull busted off, You saying it was plastic ?
If so do your self a favor and pick up a bronze thru hull , use the 5200 and you will never have to worry about it again.
Plastic should NEVER be used below the water line !

[nightfighter]

Ronnie, he is making a SS thru hull at work...... not an option for the rest of us....

Paul, if you have any other delran/plastic thru hulls, replace them too You should be able to snap them off easily by jamming a large screwdriver from the outside and working it from side to side pretty aggressively. Scary how easily they will break off..... I use a y-valve on my pump to switch from baitwell to washdown. Works well.