Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Striper Chat - Discuss stuff other than fishing ~ The Scuppers and Political talk » DIY - Forum

DIY - Forum Do It Yourself for Non-Fishing Items

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2012, 08:15 AM   #9
ed morini
Registered User
iTrader: (0)
 
ed morini's Avatar
 
Join Date: Feb 2002
Location: holliston,ma
Posts: 120
the game

While it is quite evident that the codes have changed recently, I wouldn't necessarily blame the govt. The insurance companies are the culprits here. After Andrew in Florida, and Katrina the insurance companies have been looking for ways to limit their liabilities. Code changes were made to strengthen up the exterior weak points...windows and doors and garages and decks. Originally the Cape and Islands, and Mass coastal areas were designated as 120 mph wind areas requiring expensive windows and doors and framing ties. This was later changes to 110 mph and there is an allowable storm panel provision to protect regular windows. Here in Holliston the wind rating is 100 mph so there are no issues. The building code does require one means of egress to be 3'-0" and an inspector could make the case that if you replace the door that is sub par then a three foot door should be installed. I do know that in the 7th edition, code any work done to a means of egress required a permit. I don't know if this provision made it into the 8th edition but I'll look Changing a door size to a larger one would require a permit anyway

Ed
ed morini is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:23 PM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com