|
 |
|
|
|
 |
|
 |
|
Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general |
 |
11-19-2012, 11:59 AM
|
#1
|
Registered User
Join Date: Feb 2003
Location: Newtown, CT
Posts: 5,659
|
Quote:
Originally Posted by Mr. Sandman
Re : ball method...This probably will work if in sand or mud but not rock. If the anchor is hung or stuck, no ball is going to pull it up. When the boat reaches the end of its rope something is going to break or bend badly.
|
If you use the zip ties, like was described on the anchor the ball will pull it up without a problem.
|
|
|
|
11-19-2012, 12:13 PM
|
#2
|
Also known as OAK
Join Date: Apr 2003
Location: Westlery, RI
Posts: 10,408
|
Quote:
Originally Posted by MakoMike
If you use the zip ties, like was described on the anchor the ball will pull it up without a problem.
|
We use it in the rocks, w/ a danforth all the time Jim.
The grapels are tough in deep water to anchor accurately on small structure, even with a ton of chain, the danforths are a lot more accurate b/s they drop so much faster...
|
Bryan
Originally Posted by #^^^^^^^^^^^&
"For once I agree with Spence. UGH. I just hope I don't get the urge to go start buying armani suits to wear in my shop"
|
|
|
11-19-2012, 02:24 PM
|
#3
|
Registered User
Join Date: Nov 2005
Posts: 427
|
Like RIRock stated grapples are tough in the deep. We usually fish 95+ feet and we've bent the s%$t out of the Danforth but a little heat and a press ant it's ready to go again do be shy about the chain.
Getting short strong ties can be a challenge but I found them at some of the industrial parts websites. Also lobstermen sometimes use them.
The heck with an expensive SS anchor go down to your local commercial fishing pier and I guarantee you can buy one cheap. They drag them up and lobstermen get them all the time.
|
[SIGPIC][/SIGPI I cut my deck to the Queen of Spades, but the cards were all the same
|
|
|
11-20-2012, 11:01 AM
|
#4
|
Registered User
Join Date: Feb 2003
Location: Newtown, CT
Posts: 5,659
|
Quote:
Originally Posted by tautog
Getting short strong ties can be a challenge but I found them at some of the industrial parts websites. .
|
You can use the longer ones and just cut them short after they are installed.
|
|
|
|
11-20-2012, 03:46 PM
|
#5
|
Seal Control
Join Date: Nov 2002
Location: Caver, Ma.
Posts: 3,875
|
I have a guy on my site, that makes them, and sells them, they are great!
|
"All my friends are Flakes!!"
BOATLESS
|
|
|
11-21-2012, 02:02 PM
|
#6
|
Registered User
Join Date: Nov 2005
Posts: 427
|
Mike, you can cut the tail off but to get the thick ones you end up paying for the extra length. We like to use the thick ones esp if it gets rough or sloppy they don't have a tendency to break. The ones we get are 6" or 8".
George
|
[SIGPIC][/SIGPI I cut my deck to the Queen of Spades, but the cards were all the same
|
|
|
 |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:24 AM.
|
| |