Cord Wrap

[makomania]

Originally Posted by Scratch59

I'll be there, but I'm telling you. At least with the fore grip, it needs to be wrapped over something or weaved. I wrapped it as tight as I could and used drops of Zap a Gap thin in spots. I tied a VERY tight Turks head at the top to anchor it all down and it STILL came unraveled with all the torque on the fore grip. I still like the style, I just need to re-wrap over something that provides some friction.
Posted from my iPhone/Mobile device

the 1327 doesn't have a lot of taper in the butt...I'm wondering if my wraps didn't slip bc of that....I fished this rod all over and swam with it, worst unravel I had a was a little slippage fixed by spinning the cord tighter.

For the rest of my handles, I'll be looking into some sort of adhesive or sealer just to be safe.

[Ian]

Originally Posted by makomania

the 1327 doesn't have a lot of taper in the butt...I'm wondering if my wraps didn't slip bc of that....I fished this rod all over and swam with it, worst unravel I had a was a little slippage fixed by spinning the cord tighter.

For the rest of my handles, I'll be looking into some sort of adhesive or sealer just to be safe.

I don't like the concept of sealer, but as long as you wrap tightly over something with texture (which I have on the butt section of the rod in this thread) the wraps are damn near bombproof. The fore grip is slick untreated blank and the wrap is starting to spin and loosen. I will be taking that section off and treating the blank with something like cork tape, double sided tape, etc. Something that keeps every last piece of the spiral wrap in contact with a surface that creates a lot of friction. Topped off with a turks head that wrap won't come undone through even the toughest wear.
Posted from my iPhone/Mobile device

[makomania]

Originally Posted by Scratch59

I don't like the concept of sealer, but as long as you wrap tightly over something with texture (which I have on the butt section of the rod in this thread) the wraps are damn near bombproof. The fore grip is slick untreated blank and the wrap is starting to spin and loosen. I will be taking that section off and treating the blank with something like cork tape, double sided tape, etc. Something that keeps every last piece of the spiral wrap in contact with a surface that creates a lot of friction. Topped off with a turks head that wrap won't come undone through even the toughest wear.
Posted from my iPhone/Mobile device

I'm liking the idea of double side tape, I'm thinking auto trim tape? It's very sticky and should be waterproof to an extent

are you using a jig for the turk's head? I want to teach myself how to do them