multiple epoxy coat questions

[iamskippy]

From what i have found, if you are using a spinner and your temps are around 90 you can re apply after 5-6 hours for the second coat. this has been a proven method for me. If you are not using heat and a spinner let set up for 72 hrs and scuff with 1200 grit and re apply.
Posted from my iPhone/Mobile device

[eskimo]

I don't think it needs a light sand as much as it just needs to be scuffed. Most important is making sure the plug is wiped down with either denatured alcohol or mineral spirits before the second coat.

I'm bad with time so I just give everything more then enough.

[Fishoholic]

I've never used etex, but with system three, I wait for full cure, lightly sand with 320 and wipe with denatured alcohol. I know you can recoat without sanding or wiping down if still in the "soft set tack free stage". I always like sanding for a better finish though.