Van Staal self service tip!

[Casting Z's]

I'm done here!

[afterhours]

dave- i hope this isn't a reverse psychology vs bash ....but if your careful during reassembley you won't run into this problem- it's not a big deal to correctly align everything properly.

[Casting Z's]

Originally Posted by afterhours

dave- i hope this isn't a reverse psychology vs bash ....but if your careful during reassembley you won't run into this problem- it's not a big deal to correctly align everything properly.

I'm pretty good with this kind of stuff. Sometimes you just miss. Knowing better, it happened to me again just the other day.
Be as careful as you might, it can happen to you too.
Just keep it in mind?

[afterhours]

i'm also good with this stuff and routinely break down all my vs's and can't see this happening .......happened to ya twice??

[MAC]

I always put the gear in then screw the side plate on. Never had a problem. Don't need a block of wood though to remove the main gear. (My reels don't leak on the handle seal either)

[Casting Z's]

Originally Posted by afterhours

i'm also good with this stuff and routinely break down all my vs's and can't see this happening .......happened to ya twice??

Aren't you the VS sharpie!
Eat me!
This whole site is full of jerks!
I'm really surprised a product developer has time to jump on my back.
Just as well! I never would use any of your products if you gave it to me.
Later Youall!

[MAC]

Hey don't get your panties in a bunch. You getting somebody questioning something should be a given the way you have been pushing the Z over VS.

[afterhours]

Originally Posted by Casting Z's

Aren't you the VS sharpie!
Eat me!
This whole site is full of jerks!
I'm really surprised a product developer has time to jump on my back.
Just as well! I never would use any of your products if you gave it to me.
Later Youall!

no vs sharpie- just mechanicly inclined ...your post just seemed to me to be a reverse bash. one minute trashing vs' and the next telling folks how to deal what you term a common problem.. a lot of guys i know service their own and never dealt with this- me included. you sure to act like a person with an agenda. and that last post- reminds me of a little boy having a hissy fit.

[Terence]

Originally Posted by afterhours

dave- i hope this isn't a reverse psychology vs bash ....but if your careful during reassembley you won't run into this problem- it's not a big deal to correctly align everything properly.

AA, I'm pretty sure this post was a tip to help anyone who has locked their reel to get out of it w/o sending it in. I know the guy and Reverse Psychology isn't his style.

[MAC]

Originally Posted by Terence

AA, I'm pretty sure this post was a tip to help anyone who has locked their reel to get out of it w/o sending it in. I know the guy and Reverse Psychology isn't his style.

Ok, now I see what he is trying to help with. Sounds like a great idea.

[ptldsurfcaster]

Thanks for the tip, I just made this mistake this morning and spent 3 hrs trying to figure out what to do to correct the problem. I did not want to admit to my wife that I need to spend a few hundred bucks to correct it.
I will give it a try tomorrow and let you know how I make out..

[afterhours]

maybe it's just me...just be careful and it's a breeze.....maybe some folks should send 'em in for service. dave iffin' your truly tryin' to be helpful .