| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
04-28-2014, 05:48 PM
|
#1
|
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
Iwata problem solved
The housing on this air brush that fits onto the front of the gun and covers the nozzle through which paint flows, comes apart, and is actually a two piece unit. When I cleaned the nozzle I always took the housing off in one piece. Low and behold red paint found its way into the threads that screw both pieces together. A minute amount, a very minute amount was located there. This was enough of an obstruction that caused the front and back of the two piece nozzle housing to not seal properly and allowed air to backflow into the air gun and bubble up in the bowl. Clean the affected area and voila, it works just fine again.
Last edited by Swimmer; 04-28-2014 at 07:21 PM..
|
Swimmer a.k.a. YO YO MA
Serial Mailbox Killer/Seal Fisherman
|
|
|
|
04-28-2014, 06:36 PM
|
#2
|
|
Registered User
Join Date: Aug 2010
Location: A village some where
Posts: 3,436
|
I just went to lay down some white, and one of my,siphon feeds was not cleaned so well.... well the spraying didnt go,well. Can not wait for the sonic cleaner to get here..
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
04-28-2014, 07:20 PM
|
#3
|
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
Quote:
Originally Posted by iamskippy
I just went to lay down some white, and one of my,siphon feeds was not cleaned so well.... well the spraying didnt go,well. Can not wait for the sonic cleaner to get here..
Posted from my iPhone/Mobile device
|
Where did you orderthe cleaner from?
Posted from my iPhone/Mobile device |
Swimmer a.k.a. YO YO MA
Serial Mailbox Killer/Seal Fisherman
|
|
|
|
|
04-28-2014, 07:24 PM
|
#4
|
|
Registered User
Join Date: Aug 2010
Location: A village some where
Posts: 3,436
|
Amazon, was on sale. Normal was 100 bucks, on sale for 24.99. Its a 43k hertz or Somethig to that degree, i know its one of the higher ones i have seen.
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
04-29-2014, 05:31 PM
|
#5
|
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
Quote:
Originally Posted by iamskippy
Amazon, was on sale. Normal was 100 bucks, on sale for 24.99. Its a 43k hertz or Somethig to that degree, i know its one of the higher ones i have seen.
Posted from my iPhone/Mobile device
|
Ordered one Skippy.
Posted from my iPhone/Mobile device |
Swimmer a.k.a. YO YO MA
Serial Mailbox Killer/Seal Fisherman
|
|
|
|
|
04-29-2014, 06:03 PM
|
#6
|
|
Registered User
Join Date: Aug 2010
Location: A village some where
Posts: 3,436
|
Quote:
Originally Posted by Swimmer
Ordered one Skippy.
Posted from my iPhone/Mobile device
|
Nice mine should be here soon.
Posted from my iPhone/Mobile device
Posted from my iPhone/Mobile device |
|
|
|
|
|
|
05-05-2014, 08:00 PM
|
#7
|
|
Registered User
Join Date: Aug 2010
Location: A village some where
Posts: 3,436
|
Got mine in today, took apart both brushes, used the cleaning mixture found on here. Ran it for 4 cycles and then let sit in water for a few and let,dry, looks like a new brush.
I used the super lube and assembled it, soooooo smooth,can not wait to shoot a few plugs with em.
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
 Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:38 PM.
|
| |
