|
|
|
|
|
|
|
|
|
Plug Building - Got Wood? Got Plug? |
|
12-01-2013, 11:25 AM
|
#1
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
Cyclone Dust Seperator
Picked up an Oneida Dust Deputy cone at woodcraft the other day. I only bought the cone, not the full kit. So here's how I did it. I bought some gasket material from HD and a bucket too. Cut the 3" hole in the top of the lid. After cutting out the gasket material, I snugged it all up with 1/4"x1" bolts and silicone sealer. Works the balls!!
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-01-2013, 11:27 AM
|
#2
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
I also had some scrap plywood laying around that I used to reinforce the bottom. I have since put some washers between the plywood and nuts.
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-01-2013, 11:29 AM
|
#3
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
finished product. I will probably get a 2nd bucket and attach some wheel to it so I can empty it easy enough as well an have it move around the shop without it tipping over.
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-01-2013, 11:30 AM
|
#4
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
I also did end up using a little tape around the intakes to snug up and loose connections.
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-15-2013, 09:45 PM
|
#5
|
Registered User
Join Date: Feb 2012
Location: Middleboro
Posts: 43
|
I understand the bucket but what is feeding it ? Direct from the tool or from an exhaust fan ? thanks
|
|
|
|
12-15-2013, 10:12 PM
|
#6
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
Cyclone is between tool and vacuum. It separates out a very high percentage o chips and dust, thus saving the vacuum filter from needing much cleaning.
|
|
|
|
12-16-2013, 12:28 AM
|
#7
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
so far it's been great. It has done a great job removing almost all the fine and medium dust and just lets bigger pieces through. Very happy with it. I also just put it on wheels, so that makes it move much easier
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-16-2013, 10:01 AM
|
#8
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
So, could some pics be posted that take into account the vacuum being used and exactly how it is attached via the hoses to the dust collector. And the tube coming out of the dust/particle collector, is that some a sock could be secued too?
Posted from my iPhone/Mobile device
|
|
|
|
12-16-2013, 10:22 AM
|
#9
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
|
|
|
|
12-16-2013, 11:24 AM
|
#10
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
the hose coming off the side of the cyclone cone goes to the vac, the hose coming off the top is the end that sucks, to clean whatever you need
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-16-2013, 11:30 AM
|
#11
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
the wheels on the bottom help a lot with stability
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
12-16-2013, 01:02 PM
|
#12
|
Registered User
Join Date: May 2000
Location: Cumberland,RI
Posts: 8,555
|
I got a cheap flat bed cart that allowed both the bucket with the Cyclone and the vac to be bungee corded down on it. the whole thing (cyclone bucket and vac) all wheel around together. It works great as you say. If I did it again I'd get a bigger bucket to mount the cyclone on since about 98 percent gets separated out , the 5 gallon bucket fills up quick.
|
Saltheart
Custom Crafted Rods by Saltheart
|
|
|
12-16-2013, 04:46 PM
|
#13
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
Quote:
Originally Posted by N.ShoreFisher
the hose coming off the side of the cyclone cone goes to the vac, the hose coming off the top is the end that sucks, to clean whatever you need
|
Thanks for the extra pics, and Ross as always an ever accomodating gentleman. I am going to make one immediately.
Posted from my iPhone/Mobile device
|
Swimmer a.k.a. YO YO MA
Serial Mailbox Killer/Seal Fisherman
|
|
|
12-23-2013, 07:40 AM
|
#14
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
Google super-charge your shop vacuum
The pdf from Woodsmith has a set of plans for a cart to carry the cyclone and shop vacuum that really works well.
|
|
|
|
12-26-2013, 11:32 AM
|
#15
|
Registered User
Join Date: Mar 2010
Location: Melrose, MA
Posts: 92
|
Slick set-up. I have been thinking of doing something similar in my small work area. Thanks for posting it.
|
|
|
|
12-27-2013, 06:33 PM
|
#16
|
Retired Surfer
Join Date: Dec 2000
Location: Sunset Grill
Posts: 9,511
|
I downloaded the plans, its a pretty cool setup. Will give serious thought to making it.
Posted from my iPhone/Mobile device
|
|
|
|
12-28-2013, 11:19 AM
|
#17
|
Old Guy
Join Date: Oct 2004
Location: Mansfield, MA
Posts: 8,760
|
I want to put one in front of my big Jet and move the Jet outside in a shed, along with my air tank. Cut down the noise significantly doing that.
|
|
|
|
07-08-2014, 06:43 AM
|
#18
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
I finally put my unit together and tried it out yesterday. Works exactly as advertised, if not better. If you hate cleaning the filter on your shop vacs as much as I do, this is a must have item. I definitely need to figure out which cart I want to build for it as it is tipsy if not attached, even after adding the wheels to the bottom bucket. Suction was constant and seemed to be stronger, though I was starting with a clean filter that now stays clean... Highly recommend!
|
|
|
|
01-11-2015, 11:08 AM
|
#19
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
|
|
|
|
01-12-2015, 07:21 PM
|
#20
|
Seldom Seen
Join Date: May 2001
Posts: 10,505
|
Mine is 90% done. Just the hose holder left, but more interested in adding the I socket as shown in the video above.
|
|
|
|
02-06-2015, 08:03 PM
|
#21
|
Registered User
Join Date: Oct 2005
Location: Vineyard Haven
Posts: 413
|
You could use that for sanding drywall too. Put few inches of water in the bucket. There are hand sanders and pole sanders with attachments to suck up drywall dust and deposit it in the water before clogging vacc filter.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:24 PM.
|
| |