Quote:
Originally Posted by Rockfish9
some times they crust with barnacles if you don't paint them....if you go to bronze it needs to be bonded lest you risk sinking the boat due to electrolysis....
|
Quote:
Originally Posted by thefishingfreak
If it's just the screw over the top scoop, just smear some paint on it.
Barnacles will clog it up.
Full thru hull, with valve, has to be grounded like mentioned above
Posted from my iPhone/Mobile device
|
The electrolysis is the big issue. Check out your zincs when you haul it out. All it takes is a boat with a bad ground on the next dock to wreak havoc on your boat's parts. Sometimes it's the marina that's discharging.... If I were in a marina, I would hang huge sacrificial zinc fish every time I tied up the boat.....
Hybrid Mode
