Spence - check the overflow unit on the dishwasher - it is inside and looks like a dome. See if the unit is leaking on the seam where it attaches to the bottom of the tub. They have a habit of rusting out there. Happened to my dishwasher and it also was a Kitchen Aid. I had to replace it. Good luck.
spence, take a look, they really are a pretty simple set up. chances are one of the hose connections or the pump may be leaking. In which case if it is a clamp, you have ruled out stupid.
Dave/ F18 put this link up a while ago. it may br helpful http://www.repairclinic.com/
redcrbbr
of all the things i've lost...i miss my mind the most!!
IMO I would just replace it. The new models are quieter, wash better and are more efficient.
I replaced my old one after about 8-10 years with a Whirlpool quiet partner II. Very nice machine does a much better job.
I installed it quick and easy.
Good Luck....
~..~..~.. ><((((º>
Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.
Spence - check the overflow unit on the dishwasher - it is inside and looks like a dome. See if the unit is leaking on the seam where it attaches to the bottom of the tub. They have a habit of rusting out there. Happened to my dishwasher and it also was a Kitchen Aid. I had to replace it. Good luck.
Hybrid Mode
