|
|
|
|
|
|
|
|
|
How To's, F.A.Q.s, Tips, & Tricks How-To's, Tips & Tricks plus Frequently Asked Questions (FAQs) **** Please Do Not Start Discussions or Ask New Questions in Here **** This is for popular Threads To be moved here for easy access & discussion. Post all new questions in main Stripertalk Forum |
|
02-08-2003, 02:30 PM
|
#1
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
making a gaff
Finaly got around to making a custom gaff. Its is alot easyer to spend the twenty bucks on a nice gaff but to me there's something special about having something you made. Almost like custom rods the lengths of the grips and where you want them to be placed is all up to you, just like anything else the more time you spend and the more thought out your design the better end result.
This is what you'll need to make you basic gaff:
1...1"x4' hard wood dowel
2...2' peice of poly rope
3...two part apoxy
4...9/16 U nails
5...3' cork tape
6...the hook
7...string 1/16
8...butt cap
Before cuting the dowel to the desired length, cut a gap so that your hook fits snug. I do this by starting with a jig saw..then a mider saw and a drill.
|
|
|
|
02-08-2003, 02:36 PM
|
#2
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
Before setting the hook in place I file the end to the desired taper and paint it black. Fill in the gap with plenty on apoxy and use a U nail to hold it snug
|
|
|
|
02-08-2003, 02:43 PM
|
#3
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
Then cut your dowel to the desired length. I then drill about 11/4 from the end straight through. A little bigger then the size of your rope. From the top drill a hole twice the size of your rope in the center of he dowel. I use 40# to pull my rope through. Once through I burn the ends good and tack them down with one U nail. Apoxy.
|
|
|
|
02-08-2003, 02:48 PM
|
#4
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
Once I sand apoxy around the hook area I then wrap it tight with rope. This type rope can be found for cheap $$ at ship supply store. you can use a snell type tie(as recently shown in the fisherman, last week) or use a the same tie-off used in rod wrapping.
|
|
|
|
02-08-2003, 02:57 PM
|
#5
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
paint your gaff now or if it will be wrapped there is no need. Apply your cork tape. I add 3/4" more on each end for filing and then to be sanded. At this point if you wish to paint, wrap the ends with E size thread(use the same technic as in rod wrapping)
|
|
|
|
02-08-2003, 03:04 PM
|
#6
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
I find that wrapping a dowel is easyer then wraping a rod just because the diameter is the same from end to end. You can get as crazy as you want or keep things simple"its just gaff" People tell me mine is crazy...then I guess it fits me perfect!
Drill ahole through the butt cap, pull through with mono.
Last edited by thefishingfreak; 02-05-2006 at 03:09 PM..
|
|
|
|
02-08-2003, 03:09 PM
|
#7
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
The finishing touch will be a bass decal between the diamonds and the name on the boat in the middle of the swirl.
Last edited by thefishingfreak; 02-05-2006 at 03:09 PM..
|
|
|
|
02-08-2003, 03:21 PM
|
#8
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
This is my first gaff so you guys that have done them and know of a better way...I'ld like ta hear it.
Last edited by thefishingfreak; 02-05-2006 at 03:09 PM..
|
|
|
|
02-08-2003, 05:02 PM
|
#9
|
Hardcore Equipment Tester
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
|
Thats excellent Tony, are you gonna epoxy the whole thing?
|
Bent Rods and Screaming Reels!
Spot NAZI
|
|
|
02-08-2003, 05:52 PM
|
#10
|
Really Old & Really Grumpy
Join Date: Jun 2002
Location: not a clue
Posts: 4,860
|
GOOSE.....better leave that ta home. it'll take a walk fa sure when your not lookin.......nice job........did that to a guys 6' boat antenna once.
|
BOAT fish do count.
|
|
|
02-09-2003, 07:26 AM
|
#11
|
All up in the Interweb!
Join Date: Mar 2002
Location: In the dog house.
Posts: 5,198
|
real nice work! been thinking about something like that for a while, but somebody told me they were gonna make up a bunch this off season...........
i have seen some gaffs done with old rod blanks, too. anybody ever do this? i need to do up something for using over at the C'town b'way. taken too many waves gooing down after other guys fish.
|
|
|
|
02-09-2003, 08:02 AM
|
#12
|
Really Old & Really Grumpy
Join Date: Jun 2002
Location: not a clue
Posts: 4,860
|
made a 6"er for the rocks, people thought I was nuts, but I stayed dry.
|
BOAT fish do count.
|
|
|
02-09-2003, 08:05 AM
|
#13
|
All up in the Interweb!
Join Date: Mar 2002
Location: In the dog house.
Posts: 5,198
|
CS - you use a wooden dowel or a fiberglass blank? i would need to do something in the 6' range for the b'way.
|
|
|
|
02-09-2003, 08:50 AM
|
#14
|
Really Old & Really Grumpy
Join Date: Jun 2002
Location: not a clue
Posts: 4,860
|
I used a push broom handle I had hangin around, cut the slot , wraped the head with sst 40# jig wire an coated with poxy. it gets beat up on the rocks so I didn't make it to look purty. about 9 yrs old now an still works fine.
|
BOAT fish do count.
|
|
|
02-09-2003, 10:13 AM
|
#15
|
Callinectes sapidus
Join Date: Oct 2001
Posts: 6,272
|
Quote:
and know of a better way...I'ld like ta hear it.
|
...you could go to a raffle with a friend......and WIN ONE!!!
thanks Goose!
Last edited by thefishingfreak; 02-04-2006 at 11:26 PM..
|
... it finally happened, there are no more secret spots
|
|
|
02-09-2003, 10:59 AM
|
#16
|
Registered User
Join Date: Sep 2001
Posts: 7,649
|
Very nice? How is the weight? I want to make a jetty gaff from a heavy rod blank.
|
|
|
|
02-09-2003, 11:54 AM
|
#17
|
Registered User
Join Date: Feb 2002
Posts: 4,716
|
Thanks guys.....I haven't weighted it but it feels alittle on the heavy side for a gaff. You could also go with 7/8'' aluminum pipe which is a little lighter then a glass rod or wood.
Certain areas require an even longer gaff. Last year, after learning the hardway, I made a 18' gaff. : Guys who fish RI rocky shores know how turbulent and rough them waters can often be. Not only will a gaff of that length help you land BIG fish but more importantly, will not have you take unnecessary risks.
This 18' gaff (two piece telescopic) consists on two poles( 7/8"x9' and 11/2''x9'). I predrill two holes on the end held with nuts and bolts. I also build up one end with duct tape so theres less play. The hook is held with tw s/s pipe clamps. At 9' it fits in the van nice.
Most guys will never have the need for a 18' gaff but theres always those few hot spots that most guys won't even think about trying. Put your gaff together before you cast.
Last edited by Goose; 02-09-2003 at 11:59 AM..
|
|
|
|
02-09-2003, 12:31 PM
|
#18
|
Really Old & Really Grumpy
Join Date: Jun 2002
Location: not a clue
Posts: 4,860
|
I maDE A HERRIN NET OUT OF A fiberglass extention paint roller handle, folded up it was 8' long, pull it out its 14' long, no hands an knees fa this boy.
|
BOAT fish do count.
|
|
|
03-02-2003, 09:49 PM
|
#19
|
Registered User
Join Date: Dec 2002
Location: Mashpee, Cape Cod
Posts: 10
|
Gee, that is a pretty gaff. However, for you more pragmatic fisherman (from a former commercial guy) Use a oak staff, Take the right angled 1/2" point and take a hammer and nail it into the shaft (as it was designed) and wrap it with wire or heavy line. If you need one fast for a temporary fix you can use duct tape to hold it in place. Even this temporary fix will work on a gaff to lift about 1000 -2000 lbs of cod depending on the number of duct tape wraps you make!
Good Fishing, Lobsterman
|
|
|
|
01-04-2008, 10:12 PM
|
#20
|
__________________
Join Date: Oct 2004
Location: Recently relocated to the shores of Rhode Island - East Bay!
Posts: 505
|
I think the pictures are eff'd up. Pretty funny though. Any way to fix?
|
|
|
|
08-08-2012, 10:20 PM
|
#21
|
Callinectes sapidus
Join Date: Oct 2001
Posts: 6,272
|
???? Yeah, pictures are wrong....and a lot of edits from the "FishingFreak"...
What happened to this thread???
|
... it finally happened, there are no more secret spots
|
|
|
08-12-2012, 10:16 AM
|
#22
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
I have a 4' made out of an old tuna blank. Custom diamond wrap by Dave Hammock at Murats right before he died.
|
No boat, back in the suds.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:58 PM.
|
| |