|
|
|
|
|
|
|
|
|
Plug Building - Got Wood? Got Plug? |
|
|
12-20-2009, 11:03 AM
|
#211
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Hey George by the way that 6" Musso swimmer that I was lent may be a surface swimmer and not a Pine, as someone pointed out to me that the line tie is very low on the face. I has a P above the lip but it doesn't look like the line tie is in the right place for a Pine. Do you think the weighting is the same as the pine? It weighs 2.1 oz's without hooks.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 11:13 AM
|
#212
|
BigFish Bait Co.
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
|
That weight being shoved in "BELOW" the thru wire I have to guess is because the weight they used did not have a hole to pass the wire through? I would not jam the weight in below the wire as I do not think it will do anything performance wise to simply use a traditional wire through the weight approach! My .02 cents!
|
Almost time to get our fish on!!!
|
|
|
12-20-2009, 11:23 AM
|
#213
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
I may have to agree with Lawrence on this one if it is used on a thin plug like a needle but if that technique was used on a larger dia. plug like a swimmer or larger I think it may have some merit. My 3 cents.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 11:27 AM
|
#214
|
Registered User
Join Date: Feb 2003
Location: Here and There Seasonally
Posts: 5,985
|
Just speculating here because all this hurts my head. Wouldn't a weight lower than the center of the plug tend to lessen or eliminate roll? Like a sailboat's keel?
|
He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself.
Thomas Paine
|
|
|
12-20-2009, 11:42 AM
|
#215
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
that would be my thought Fred.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 11:58 AM
|
#216
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Quote:
Originally Posted by ProfessorM
Do you think the weighting is the same as the pine? It weighs 2.1 oz's without hooks.
|
Yes, I suspect the SS jr is weighted the same as the Pine Jr (I think .4 oz is about what 3 3/0 trebles weigh and the pine I had weighed 2.5oz). The SS sr and Pine sr are weighted the same. Get it to me and I'll xray it to be sure. Is the lip slot .34 down from the head?
|
|
|
|
12-20-2009, 12:00 PM
|
#217
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
I don't think Bob Pond had any subtle plan when he shoved that weight in there. Probably just pencil lead he could get easily.
|
|
|
|
12-20-2009, 12:02 PM
|
#218
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Paul, which darter did you build. The Musso or the Gibbs? If the Gibbs did you go old school or new school with the hook/weight placement?
|
|
|
|
12-20-2009, 12:04 PM
|
#219
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Speaking of darters, since I like to talk to myself, did anybody see the bit on Melnyk's blog about thinking a blurple plastic musso loaded to float neutral was his favorite plug? Maybe I'll need to fool with those oversealed over heavy bodies I still have.
|
|
|
|
12-20-2009, 12:37 PM
|
#220
|
Registered User
Join Date: Mar 2008
Location: S. Boston, MA
Posts: 214
|
numbskull i think those overweight darters swim just fine
haven't caught on it yet, but I like the action
|
|
|
|
12-20-2009, 01:05 PM
|
#221
|
Registered User
Join Date: Apr 2009
Location: L.I.NY
Posts: 86
|
I feel like I'm sitting in back of Grad school class..
Pretty cool
|
|
|
|
12-20-2009, 01:33 PM
|
#222
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
I have the Musso's all turned exactly like the beauty you lent me. I am on to the angles this week. I made most out of birch and 2 out of AYC and a pine one to use as my set up piece. Going to do a few thru drilled all the way thru and a few drilled from the rear to the front hook hole and then drill the front thru hole by hand after the angles are done to see which is the easiest. I still intend to do some of the Gibbs small size and the thinner Gibbs size too but may not get to them till later this winter. I am going to concentrate on the Musso. I will also let you take a pic of the Musso SS and maybe the peanut conrad. Thank you.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 01:34 PM
|
#223
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
What blog are you refering too G.?
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 02:58 PM
|
#224
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
This one, Paul. Surfcasting.com He is an interesting guy.
|
|
|
|
12-20-2009, 05:13 PM
|
#225
|
Registered User
Join Date: Feb 2003
Location: Here and There Seasonally
Posts: 5,985
|
Thanks for the reminder , George. I haven't been there in a very long time, things are a little different.
|
He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself.
Thomas Paine
|
|
|
12-20-2009, 08:08 PM
|
#226
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
thanks G. I just watched him on Monster fish on Nat geo channel catch a big striper while floating around in a wet suit . It just got over.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 08:52 PM
|
#227
|
____________
Join Date: Jun 2008
Location: new bedford, Ma.
Posts: 651
|
8am or 8pm?
still messing with the musso's as well.
Also started some needle's but want to try maple along with the birch ones. Finished these up over the week in the heated room vs. the garage.
|
Nobody calls me Lebowski. You got the wrong guy. I'm the Dude, man.
|
|
|
12-20-2009, 09:11 PM
|
#228
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Very nice job Frank. Really well done. How long are they?
I did good in the canal on pretty small poppers last year and am making a few more this year. Very similar in shape. I also like a very small amount of crystal flash and hair on the rear treble.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
12-20-2009, 09:24 PM
|
#229
|
____________
Join Date: Jun 2008
Location: new bedford, Ma.
Posts: 651
|
5.75" almost 2oz on the dot.
usually put a single siwash w/hackle on the back but need to sit down and actually tie some up.
still messing with a slow sinking version similar to a superstrike, its just a completely different animal when made out of wood it seems. A lot of work to keep up but sometimes it seems they will only take it on the drop back.
|
Nobody calls me Lebowski. You got the wrong guy. I'm the Dude, man.
|
|
|
12-20-2009, 09:55 PM
|
#230
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,591
|
On that weight placement in that Atom 54B plug. I drilled a 11/32" hole in tail , inserted the wrie then pushed a 1/4" solder rod 1 1/4" length into the hole to the hook hole. You have to force it thru then the weight has to remain in the lower half. The trouble I notice is that it ends off to the side somewhat. I'm sure this will effect the balance. I will swim it later and at least see what a tailweight only swimmer swims like. I probably will end up through wiring a longer 1/4" tailweight. The 1/4" rod at that length is 11 grams.
|
Billy D.
|
|
|
12-20-2009, 09:59 PM
|
#231
|
Covered in Sawdust
Join Date: Jan 2008
Posts: 358
|
I love when is snows! I hit the lathe hard after shoveling for 4 hours! I have a bunch of 6 1/2" chunky pencils spun up. They worked well last spring and cast a country mile.
|
|
|
|
12-21-2009, 06:13 AM
|
#232
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Quote:
Originally Posted by eskimo
Finished these up over the week in the heated room vs. the garage.
|
First rate!!!! Those are on the to do list for me as well. I actually cut a large plastic superstrike in half to get a pattern (getting more and more like Eddy everyday). I know they are not as good a plug as the 2.5oz version, but I'm hoping I can solve that and come out with something larger and heavier. I noted the hook and weight placement are somewhat different between the two different sized plugs.
Spent yesterday drilling, drilling, and drilling. Managed to fckup a bunch of Musso (BM) wadd clones cutting the eye angles . The stock I start with is rarely true square (I rip rough lumber to width but don't bother jointing and thickness planing it) and the special brad point drill bits I use don't run true if started in a drive/tail center hole so I drill my plugs after cutting off the ends. Getting eye holes perpendicular to the hook hole (without building a jig for each style plug) is something I still struggle with.
Got darter slopes to fckup today. The firewood pile ought to grow fast. I need one of those rubber mallets that's in Mr K's second picture. The wooden one is starting to leave a mark on my forehead,
|
|
|
|
12-21-2009, 08:23 AM
|
#233
|
Covered in Sawdust
Join Date: Jan 2008
Posts: 358
|
Quote:
Originally Posted by numbskull
I need one of those rubber mallets that's in Mr K's second picture. The wooden one is starting to leave a mark on my forehead,
|
Don't be fooled, the rubber mallet hurts. It just doesn't leave a dent!
|
|
|
|
12-21-2009, 09:38 AM
|
#234
|
Registered User
Join Date: Mar 2008
Location: S. Boston, MA
Posts: 214
|
numbskull, try putting a piece of dowel in the belly hole that you drill, and if you don't already have one, a improvised v-block works great. (2 pieces of 1x with a 3/4"-1" gap between)
the longer the dowel the easier it is to get it horizontal as you have a longer "gauge" to look at when drilling.
|
|
|
|
12-21-2009, 01:52 PM
|
#235
|
____________
Join Date: Jun 2008
Location: new bedford, Ma.
Posts: 651
|
[QUOTE=numbskull;733608]First rate!!!! Those are on the to do list for me as well. I actually cut a large plastic superstrike in half to get a pattern (getting more and more like Eddy everyday). I know they are not as good a plug as the 2.5oz version, but I'm hoping I can solve that and come out with something larger and heavier. I noted the hook and weight placement are somewhat different between the two different sized plugs.
If your cutting it in half just for a pattern then let me know. I can vector it and the plug can be kept in one piece. It's very accurate. The most it will be off is a coupe of pixels. I actually might have a large version at home.
The sinking version I was messing with sunk but tail first. I was try to get it to sink more like a needle so I added a chin weight but it was to much. absolute helicopter.
|
Nobody calls me Lebowski. You got the wrong guy. I'm the Dude, man.
|
|
|
12-21-2009, 02:00 PM
|
#236
|
Covered in Sawdust
Join Date: Jan 2008
Posts: 358
|
[QUOTE=eskimo;733675]
Quote:
Originally Posted by numbskull
The sinking version I was messing with sunk but tail first. I was try to get it to sink more like a needle so I added a chin weight but it was to much. absolute helicopter.
|
Why do we do this to ourselves??? I tried making a prototype out of mahogany last season and it sunk FBI informant! Will try again this season.
|
|
|
|
12-21-2009, 02:11 PM
|
#237
|
Registered User
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,744
|
Quote:
Originally Posted by numbskull
First rate!!!! Those are on the to do list for me as well. I actually cut a large plastic superstrike in half to get a pattern (getting more and more like Eddy everyday). I know they are not as good a plug as the 2.5oz version, but I'm hoping I can solve that and come out with something larger and heavier. I noted the hook and weight placement are somewhat different between the two different sized plugs.
Spent yesterday drilling, drilling, and drilling. Managed to fckup a bunch of Musso (BM) wadd clones cutting the eye angles . The stock I start with is rarely true square (I rip rough lumber to width but don't bother jointing and thickness planing it) and the special brad point drill bits I use don't run true if started in a drive/tail center hole so I drill my plugs after cutting off the ends. Getting eye holes perpendicular to the hook hole (without building a jig for each style plug) is something I still struggle with.
Got darter slopes to fckup today. The firewood pile ought to grow fast. I need one of those rubber mallets that's in Mr K's second picture. The wooden one is starting to leave a mark on my forehead,
|
Talk to Paul before you cut those slopes.....there is a better way.....
|
A good run is better than a bad stand!
|
|
|
12-21-2009, 06:47 PM
|
#238
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Quote:
Originally Posted by Rockfish9
Talk to Paul before you cut those slopes.....there is a better way.....
|
Nah, I do it on the bandsaw about the same as you, only I use the same pinned cradle I use to mark the layout lines. It is the belt sander where I screw 'em up. That is the step I'd love to eliminate. I hate belt sanders, probably I should get a rotary one I can sight down from above with.
|
|
|
|
12-21-2009, 08:41 PM
|
#239
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,120
|
George, are you holding your belt sander on edge?
It's easy to make a cradle for it to turn it into an edge sander.so you can eyeball whar you are sanding easier.
you could also setup a specific jig for sanding the slope so they come out all the same. I'd be glad to help you with that someday if you want.
|
|
|
|
12-21-2009, 09:26 PM
|
#240
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Mine is an old, old, old Sears thing with 8" by 36" (or something like that) platen and worn bronze bearings. The price was right, free. Been paying for it ever since.
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:09 PM.
|
| |